In this example Parallel Port 1 Status was selected.Įnter your PrintServer’s password (“admin” is the default password), then click OK. You may be able to configure some printers’ settings in the Printer Configuration window.Ĭlick Status then select the Parallel Port where your printer is connected. A password may be required to access this information. The Printer Status option allows you to check the name, status, and printing details of each printer attached to the PrintServer. If you want to change it for security reasons, follow the steps below.Įnter the new password you want and retype the same password to confirm then click OK. The Linksys PrintSever uses “admin” for a default password. To find out the IP address of your router, click here. After attaching any number between 2 and 99, the IP address of the Print Server will be 192.168.1.78. In this example, the IP address of the router is 192.168.1.1. NOTE: Make sure the IP Address you’ll be assigning the PrintServer has the same first 3 numbers as the IP Address and the last number can be any number between 2 and 99. Select Fixed IP Address and enter the IP Address, Gateway Address and Subnet Mask in the fields provided. To configure a static IP on your Linksys PrintServer, follow the steps below. The Linksys PrintServer uses a dynamic default IP Address.
Select the adapter you are using to connect to the PrintServer from the Adapter Card Lists, then click OK. If you forgot the PrintServer‘s password, you may reset the PrintServer to default settings. Changing it on the PrintServer’s web-based setup page.